Contract X-Ray guides · Solar & energy

The 3% escalator: what a 25-year PPA really costs

A small annual percentage sounds harmless. Over 25 years, compounding turns it into one of the largest numbers in the contract.

Arithmetic, not a forecast

This worked example uses the contract rates and assumptions stated below. It is general information, not legal, financial, or tax advice, and it does not predict future utility rates, solar production, or savings.

The sales conversation usually starts with the year-one rate: “You pay $0.20 per kilowatt-hour while the utility charges more.” That may be true in year one. It tells you very little about year 15 or year 24 if the PPA rate rises every year.

An escalator is a scheduled increase written into the contract. At 3%, the increase is not 3% of the original rate each year. Each increase applies to the already increased rate. That is compounding.

Start with one clear example

Use these assumptions:

  • Year-one PPA rate: $0.20 per kWh
  • Annual escalator: 3%
  • Term: 25 years
  • Electricity purchased under the example: 8,000 kWh every year

The rate path looks like this:

  • Year 1: $0.20 per kWh
  • Year 10: $0.26 per kWh
  • Year 20: $0.35 per kWh
  • Year 25: $0.41 per kWh

By the final year, the rate is a little more than double the starting rate. Nothing unusual happened. The contract simply applied 3% again and again.

Now add up all 25 years

At a flat $0.20 per kWh, 8,000 kWh costs $1,600 per year. Over 25 years, the total is $40,000.

With the 3% escalator, the same 8,000 kWh per year costs about $58,300 over the full term.

The difference is approximately $18,300 more than the same contract with no escalator. That is the cost of the percentage that sounded too small to matter.

Why the last years carry so much weight

In year one, a 3% increase on $0.20 adds less than a cent to the next year’s rate. By the later years, 3% is being applied to a rate around $0.35 or $0.40, so each increase is larger in cents. The percentage stays the same. The dollars do not.

This is also why a proposal that shows level savings for 25 years deserves a second look. If the PPA price rises but the comparison quietly assumes the savings stay flat, the table is leaving out the escalator’s main effect.

What happens at 3.49%?

The difference between 3% and 3.49% looks minor in a sales meeting. Compounding makes it visible.

Starting at the same $0.20 per kWh, a 3.49% escalator produces a rate of about $0.27 in year 10, $0.38 in year 20, and $0.46 in year 25. Using the same 8,000-kWh assumption, the 25-year total is about $62,200 — roughly $22,200 more than the no-escalator version.

The utility comparison is not guaranteed

A PPA escalator is usually a contract term. Utility rates follow a different path. They can rise faster in one period, slower in another, or change through rate design rather than a simple annual percentage.

That means the right question is not, “Will utility rates rise 3% every year?” Nobody can promise that path. The better question is, “How fast would the utility price need to rise for this PPA to stay ahead, and what happens if it rises more slowly?”

Run at least three versions: utility prices flat, utility prices rising more slowly than the escalator, and utility prices rising at the same rate. If the deal only works under the most favorable version, say so plainly before signing.

Five escalator questions to ask

  1. Is the escalator fixed or capped? A cap matters more than the starting percentage.
  2. What does it apply to? Confirm whether it raises the per-kWh rate, the monthly lease payment, or both.
  3. When does the first increase occur? The anniversary may be based on signing, installation, or permission to operate.
  4. Can the provider change the method? Look for language allowing a different index, schedule, or calculation later.
  5. What is the full-term total? Ask for the sum using the contract’s stated production or payment assumptions — not just year one and year 25.

Also separate price from production. A PPA rate can rise while the system produces fewer kWh than projected. Those are different risks, and the contract handles them in different clauses. Read the production guarantee and its remedy next; the escalator math assumes the stated amount of power is actually delivered.

The short version

A 3% escalator is not a footnote. In this example, it raises the final-year rate from $0.20 to $0.41 and adds about $18,300 over 25 years. At 3.49%, it adds about $22,200.

Know the percentage. Know whether it caps. Know the full-term total. Know before you sign.

Want this math run on your contract?

Contract X-Ray reads the actual escalator, term, production, buyout, and transfer language in your agreement and explains the risks in plain English. See the sample energy report before you order.

Scan my energy contract — $199

Report in minutes. Automated informational review, not legal, financial, or tax advice. Projections are arithmetic from the contract’s stated numbers, not a guarantee of future rates or savings.